1 / 6
Voron Roof Rack with 500mm 2020 Aluminium Extrusion — zdjęcie 1
1 / 6

Voron Roof Rack with 500mm 2020 Aluminium Extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple mount to attach 500mm 2020 aluminium extrusions, to the top of a 350mm Voron. No tapping or drilling.

Ocena
0 / 5
Polubienia
9
Pobrania
33
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Attaches 500mm 2020 aluminium extrusions quickly and easily to a 350mm Voron to form a roof rack for mounting whatever you require.

Uses common 500mm lengths of 2020 aluminium extrusion. No tapping or drilling required. Readily available on Amazon.

Requirements

  • Fits the standard 4mm thick top panel, i.e. 3mm thick top panel with 1mm foam tape.

  • Designed for a 350mm sized Voron.

Bill of Materials

  • Four roof rack mounts. STL is oriented for printing, no supports required.

  • 2x 500mm 2020 aluminium extrusions

  • 8x M3x10 SHCS

  • 8x M3 T-nuts

Notes

I printed my mounts using standard Voron settings in ASA; 4 walls, 5 top and bottom layers, 40% cubic infill.

I mounted a Creality Space Pi X4 to the top of the Voron using these. This is just under 10KG when loaded with four spools of filament. Photos of the final mount attached too.

Space Pi X4

The mounting feet I used to mount the Space Pi X4 on the extrusions are here: