1 / 7
Voron Roof Rack with 500mm 2020 Aluminium Extrusion — image 1
1 / 7

Voron Roof Rack with 500mm 2020 Aluminium Extrusion

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple mount to attach 500mm 2020 aluminium extrusions, to the top of a 350mm Voron. No tapping or drilling.

Rating
0 / 5
Likes
10
Downloads
33
Makes
0
Views
149
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Attaches 500mm 2020 aluminium extrusions quickly and easily to a 350mm Voron to form a roof rack for mounting whatever you require.

Uses common 500mm lengths of 2020 aluminium extrusion. No tapping or drilling required. Readily available on Amazon.

Requirements

  • Fits the standard 4mm thick top panel, i.e. 3mm thick top panel with 1mm foam tape.

  • Designed for a 350mm sized Voron.

Bill of Materials

  • Four roof rack mounts. STL is oriented for printing, no supports required.

  • 2x 500mm 2020 aluminium extrusions

  • 8x M3x10 SHCS

  • 8x M3 T-nuts

Notes

I printed my mounts using standard Voron settings in ASA; 4 walls, 5 top and bottom layers, 40% cubic infill.

I mounted a Creality Space Pi X4 to the top of the Voron using these. This is just under 10KG when loaded with four spools of filament. Photos of the final mount attached too.

Space Pi X4

The mounting feet I used to mount the Space Pi X4 on the extrusions are here: