IKEA Clothes Rail End Holder – Screw-Mount Bar Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw-on end bracket for an IKEA-style oval clothes rail. Cup holds the bar end, and it prints flat with no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
IKEA Bar Holder – Rail End Bracket
I lost (or broke) one of the original holders for my IKEA clothes rail, so I designed a replacement. It’s a simple screw-mount bracket with a cup that holds the end of the bar. You can also use it to add a rail anywhere you need one: a wardrobe, a closet, under a shelf or inside a cabinet.
Dimensions
Footprint: about 42 × 20 mm
Total height: 17 mm (5 mm base plus a 12 mm cup)
Inner cup opening: 20.5 × 16 mm (stadium/oval shape), 12 mm deep
Cup wall thickness: 2 mm
Mounting hole: Ø6 mm through, with a Ø10 mm counterbore 2.5 mm deep
Fits
IKEA PAX
Oval or flat rails up to about 20 × 15 mm. Measure your bar before printing. If it’s loose or tight, scale the model slightly in your slicer.
Hardware
1 wood screw per holder, Ø4–5 mm, with a pan or flat head that fits the 10 mm counterbore
You need 2 holders per rail, one at each end
Print settings
Orientation: base flat on the bed, cup facing up (as exported)
Supports: none needed
Material: PETG recommended for strength and a bit of flex. PLA works for light loads.
Layer height: 0.2 mm
Walls: 4 perimeters
Infill: 30–40%