IKEA Clothes Rail End Holder – Screw-Mount Bar Bracket

IKEA Bar Holder – Rail End Bracket

I lost (or broke) one of the original holders for my IKEA clothes rail, so I designed a replacement. It’s a simple screw-mount bracket with a cup that holds the end of the bar. You can also use it to add a rail anywhere you need one: a wardrobe, a closet, under a shelf or inside a cabinet.

Dimensions

• Footprint: about 42 × 20 mm

• Total height: 17 mm (5 mm base plus a 12 mm cup)

• Inner cup opening: 20.5 × 16 mm (stadium/oval shape), 12 mm deep

• Cup wall thickness: 2 mm

• Mounting hole: Ø6 mm through, with a Ø10 mm counterbore 2.5 mm deep

Fits

IKEA PAX

Oval or flat rails up to about 20 × 15 mm. Measure your bar before printing. If it’s loose or tight, scale the model slightly in your slicer.

Hardware

• 1 wood screw per holder, Ø4–5 mm, with a pan or flat head that fits the 10 mm counterbore

• You need 2 holders per rail, one at each end

Print settings

• Orientation: base flat on the bed, cup facing up (as exported)

• Supports: none needed

• Material: PETG recommended for strength and a bit of flex. PLA works for light loads.

• Layer height: 0.2 mm

• Walls: 4 perimeters

• Infill: 30–40%