1 / 2
TECE Toilet Tank Drain Valve Gasket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gasket for the TECE A2 drain valve
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Since I couldn't get the drain valve back in after taking apart my TECE toilet tank because the gasket had stretched slightly, I had to print a new gasket so I could reassemble the tank and make it tight again.
I printed the gasket using TPU A95, a softer material might work even better.
The G-code is for the MK3.9S with 3DJake TPU A95.
Print Settings
Material: TPU A95
Perimeter: 3
Layer Height: 0,15mm
Infill: 15% Grid
No supports needed.
If you found this useful please leave a make and/or a like or support me on Ko-Fi -Thank You!