1 / 2
TECE Toilet Tank Drain Valve Gasket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A gasket for the TECE A2 drain valve
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Since I couldn't get the drain valve back in after taking apart my TECE toilet tank because the gasket had stretched slightly, I had to print a new gasket so I could reassemble the tank and make it tight again.
I printed the gasket using TPU A95, a softer material might work even better.
The G-code is for the MK3.9S with 3DJake TPU A95.
Print Settings
Material: TPU A95
Perimeter: 3
Layer Height: 0,15mm
Infill: 15% Grid
No supports needed.
If you found this useful please leave a make and/or a like or support me on Ko-Fi -Thank You!