Mini Goofy Dino Figurine, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini dino figurine with a toothy grin and scalloped crest, printed in one go without supports, for AMS or single colour.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This mini dino figurine is a round, chubby little character with stubby feet, small arms and a goofy buck tooth grin. A scalloped crest starts on his head and runs right along his back, and those big eyes give him loads of personality. He's a print in place design, so there's nothing to glue or put together afterwards. He'd look at home on a desk or a bookcase, or make a fun present for any adult who loves dinosaurs.
You get two profiles to pick from. The AMS one gives a turquoise body with a white crest and teeth plus black and white eyes, while the single colour one shows off the sculpted face in plain grey. You won't need supports, and the settings below use 0.6mm line widths, so stick with them for the cleanest result. If print in place models are new to you, he's a gentle one to start with.
Filament Colour & Material
PLA is the one to use. Turquoise with white and black gives the AMS look in the photos, and a mid grey suits the single colour version nicely.
Print Settings
Print in Place
No Supports
Wall line count: 2 or more
Infill: 15%
0.4mm Nozzle
Layer Height 0.12
This print uses 0.6mm line widths as the default, initial, and outer walls.