1 / 3
Scooped Parts Bin for Standard Pegboard — 1/4" Holes — zdjęcie 1
1 / 3

Scooped Parts Bin for Standard Pegboard — 1/4" Holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scooped Parts Bin for Standard Pegboard — 1/4" Holes A simple, practical, 3D-printable storage bin designed for traditi

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scooped Parts Bin for Standard Pegboard — 1/4" Holes

A simple, practical, 3D-printable storage bin designed for traditional workshop pegboards with 1/4-inch (6.35 mm) holes spaced 1 inch (25.4 mm) apart.

Perfect for organizing screws, nuts, bolts, washers, and other small workshop hardware.

Description

I wanted a straightforward storage solution for my workshop pegboard without the complexity of drawers, hinges, lids, or moving parts.

The result is this compact, open-top parts bin featuring a curved interior scoop that makes it easier to retrieve small screws and hardware without digging into the bottom corners.

The bin mounts directly to a traditional pegboard using an integrated four-point mounting system. No additional hardware or assembly required!

Features

  • Scooped front interior: A smooth curved surface helps guide small parts toward the front for easier retrieval.

  • Four-point mounting system: Two angled upper hooks secure the bin while two straight lower pegs stabilize it against the pegboard.

  • Removable design: Simply tilt and lift the bin to remove it from the pegboard and bring it to your workbench.

  • Open-top access: No drawers, hinges, lids, or moving mechanisms to wear out or break.

  • Compact footprint: Ideal for keeping frequently used hardware organized and accessible.

  • Single-piece print: No assembly, glue, screws, or additional hardware required.

Dimensions & Compatibility

Specification

Measurement

Bin width

82 mm

Bin depth

68 mm

Rear height

48 mm

Front lip height

28 mm

Pegboard hole diameter

6.35 mm (1/4")

Pegboard hole spacing

25.4 mm (1")

Horizontal hook spacing

50.8 mm (2")

Vertical mounting spacing

25.4 mm (1")

Important: Designed for traditional round-hole pegboards. This model is not compatible with IKEA SKÅDIS pegboards without modification.

Ensure sufficient clearance behind your pegboard for the angled hooks to engage.

Recommended Print Settings

Successfully printed and tested using PLA+.

  • Material: PLA+ (other materials may work)

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Wall loops: 4

  • Infill: 15% gyroid

  • Supports: Yes — tree supports, placed everywhere

  • Orientation: Flat bottom on build plate

  • Brim: Optional

Tree supports are recommended beneath the rear mounting hooks and the small internal reinforcement areas.

Remove supports carefully, particularly around the mounting hooks.

Installation

  1. Position the bin with the two angled upper hooks aligned with the desired pegboard holes.

  2. Tilt the bottom of the bin outward slightly.

  3. Insert the upper hooks and gently rotate the bin downward toward the pegboard.

  4. Align the two straight lower stabilizer pegs with the holes below.

  5. Allow the bin to settle into position.

To remove, reverse the process.

Design Notes

This model was developed through several iterations to get the mounting geometry right. The angled upper hooks were refined and physically tested for proper insertion into traditional pegboard holes.

The final design was printed and tested successfully using PLA+.

It's intended primarily for lightweight workshop hardware such as screws, washers, nuts, and small components.

Pegboard thickness, hole tolerances, and printer calibration may affect fit.

Feedback

If you print one, I'd love to see your make!

Suggestions for different sizes or improvements are always welcome.

Happy printing!

Tagi