Vhorlath Realms – Goblin – Gloomshank Stabber (Dark Fantasy Miniature STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lean goblin ambusher with a short blade and a tense, grounded stalking pose.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Standard Digital File License
Series: Vhorlath Realms
Season: Season III – The Shattered Crown
Faction: Goblins – Gloomcap Warrens
Model: Gloomshank Stabber
The Gloomshank Stabber waits where tunnel light fails. A short blade and a low, controlled stance suit close ambushes in the warrens, with patched leather keeping his silhouette lean and unobtrusive.
Perfect for
· Dark fantasy tabletop RPGs and narrative encounters
· Gloomcap Warrens collections and faction-themed scenarios
· Miniature painting, display and diorama projects
· Expanding your Vhorlath Realms collection
Model features
· Short ambush blade
· Close hood with visible face
· Patched leather armor
· Grounded stalking stance
· Integral scenic base with irregular broken edges and no smooth rim
· Single-piece character with integral scenic base
Available scales
32mm • 54mm • 75mm • 90mm • 120mm • 1:10
Labels use a 180 cm human reference. Nominal character height: 110 cm. Figure heights: 19.6 / 33 / 45.8 / 55 / 73.3 mm respectively; 1:10 = 110 mm. Measured from soles to head, excluding base, head ornaments and equipment.
What’s included
· 6 scales
· Unsupported STL files
· Single-piece sculpt with integral scenic base
· Digital files only; no physical miniature
Printing recommendation
Supports required. Organic/tree supports are recommended where supported by your slicer.
Inspect support coverage beneath the knife, hands, hood edge and leather hems. Review thin sections and sliced layers before printing.
Resin is recommended for fine detail at smaller scales. Larger scales can suit FDM, depending on nozzle size, layer height and the desired detail. Choose orientation and support settings for your printer and material.
Part of the Vhorlath Realms collection – Season III: The Shattered Crown.