1 / 5
8-Bit Question Block Piggy Bank (Mario fan art) - multicolour without AMS, euro coin slot, no supports — zdjęcie 1
1 / 5

8-Bit Question Block Piggy Bank (Mario fan art) - multicolour without AMS, euro coin slot, no supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The 8-bit question block, turned into a piggy bank: this time the coins go in instead of popping out.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
3
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Standard Digital File License

The 8-bit question block, turned into a piggy bank: this time the coins go in instead of popping out. 16 x 16 pixels in yellow, white and black, 150 x 150 mm, with the euro coin slot on top.

3 colours (black, white, yellow) without an AMS. Every colour is its own flat part: the inserts press into pockets in a black base, the way the pixels sit in the sprite. One filament per plate, no colour changes, no supports.

Euro coins in, coins out without breaking it. The 27.5 x 3.2 mm slot on top takes every euro coin and folded banknotes, and a 42 x 36 mm hatch at the back lets you empty it. Two hatches are included - print the one you prefer: four small screws, or a snap fit with no screws.

Checked before export. All meshes are closed and slice without repair, and the parts were checked for collisions in their assembled position: 0 mm3 of overlap. The front panel has a lip that drops inside the body, so it centres itself when you glue it.

What's in the download

  • 01_Body.stl - black - 150 x 150 x 40 mm - 10 h 28 min, 122 g

  • 02_Front_panel.stl - black - 150 x 150 x 2.7 mm - 3 h 04 min, 34 g

  • 03_Black_base.stl - black - 140 x 140 x 3.6 mm - 4 h 18 min, 50 g

  • 04_Insert_1_yellow.stl - yellow - 122.3 x 122.3 x 2 mm - 2 h 08 min, 24 g

  • 05_Insert_2_white.stl - white - 78.6 x 52.3 x 2 mm - 0 h 33 min, 6 g

  • 06_Insert_3_yellow.stl - yellow - 17.3 x 8.6 x 2 mm - 0 h 03 min, 0.3 g

  • 07_Insert_4_white.stl - white - 26.1 x 17.3 x 2 mm - 0 h 06 min, 1 g

  • 08_Hatch_with_screws.stl - any colour - 49 x 43 x 2 mm - 0 h 27 min, 5 g

  • 09_Hatch_snap_fit_no_screws.stl - any colour - 46 x 45 x 6.8 mm - 0 h 37 min, 7 g (alternative)

Plus a 3MF per colour plate, a small fit test and a colour map. Print only one of the two hatches.

Printing

PLA, 0.2 mm layers, 15 % infill, 4 perimeters. Every part prints flat, face down, no supports. No brim needed. About 21 h 07 min and 243 g in total. The files are already oriented - do not rotate them.

Print the fit test first: three inserts at 0.17, 0.25 and 0.33 mm. The model uses 0.25. If another one fits your printer better, ask and I will send that version.

Assembly

  1. Press the colour inserts into the black base (a drop of glue makes them permanent).

  2. Glue the black base onto the front panel.

  3. Glue the front panel onto the body - the lip centres it.

  4. Close the back with the screw hatch (four 3 mm self-tapping screws, 6-8 mm) or the snap-fit hatch. Print the snap-fit hatch in flexible TPU: in PLA it is too stiff and needs far too much force. PLA is fine for the screw hatch.

Size

150 x 150 x 40 mm.

Unofficial fan art: a tribute, not an official product. Super Mario and the question block belong to their respective owners. Want it in another colour, size or with a different sprite? Just ask.

Personal use. Please don't resell or redistribute the files or printed copies.

Tagi