Fan mitsubishi lv16 - Swing replacement parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, Swing replacement parts for the Mitsubishi LV16RT electric fan.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Description
A simple, 3D-printable replacement plastic linkage component for the Mitsubishi LV16RT electric fan.
This part is designed to replace a broken plastic component in the fan's mechanical linkage assembly.
The original plastic part can break over time due to aging, mechanical stress, or repeated movement. This replacement was recreated from the original component using reference photos and measurements.
The design is intentionally simplified to make it easier to 3D print while preserving the essential mounting holes and connecting pole.
Dimensions
Upper center hole: 8 mm diameter
Horizontal through-hole: 4 mm diameter
Rear plastic pole: 7 mm diameter
Rear plastic pole length: 10 mm
Main body thickness: 7 mm
Recommended Print Settings
Material: PETG recommended
Layer height: 0.16–0.20 mm
Wall loops: 4–5
Infill: 100%
Supports: May be needed depending on orientation
Orientation: Main flat face on the build plate
Notes
This is a community-made replacement part, not an official Mitsubishi component.
The model is based on measurements of an existing part and may require minor adjustments or sanding for a proper fit.
Please check the dimensions against your original component before printing and verify that the replacement moves freely without interfering with the fan mechanism.
Designed for personal repair and extending the usable life of older Mitsubishi fans.