Bike / MTB Saddle Rail Bike Light Mount – Dropper Post Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A discreet bike light mount bikes and MTB, attached below the saddle to the saddle rails. Designed for trail use
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A discreet bike light mount for mountain bikes, attached below the saddle to the saddle rails. Designed for trail use, compatible with dropper posts, and unobtrusive when no light is attached.
Design
The mount consists of two parts:
Saddle rail clamp: Mounted below the saddle to the saddle rails.
Light holder: Attached to the clamp using an M5 nut – either with a GoPro thumbscrew or an M5 bolt.
Light Holder Versions
Round version: Round cross-section, suitable for lights with rubber bands, that are optimized for seatposts
Slim, tapered version: For narrower, suitable for lights with rubber bands, that can be mounted on seat stays
Printing Recommendations
Material: PETG, i've also tested ASA but ASA is not better
Upper part of the saddle clamp: 100% infill
Required Hardware
2x M4x16 mm screws
2x M4 self-locking nuts
1x M5 nut
1x GoPro thumbscrew or M5 bolt
Assembly
Place the lower part of the clamp below the saddle rails.
Attach the upper clamp part and secure it using the M4 screws and self-locking nuts.
Position the light holder in the desired orientation.
Secure it with a GoPro thumbscrew or an M5 bolt and M5 nut.
Clip or slide in the light and check that it sits securely.
Note: Check the fit and security of the clamp and light before your first ride (the rubber band of your light MUST be tight) Retighten it after your first trail ride.