1 / 4
Bike / MTB Saddle Rail Bike Light Mount – Dropper Post Compatible — image 1
1 / 4

Bike / MTB Saddle Rail Bike Light Mount – Dropper Post Compatible

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A discreet bike light mount bikes and MTB, attached below the saddle to the saddle rails. Designed for trail use

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A discreet bike light mount for mountain bikes, attached below the saddle to the saddle rails. Designed for trail use, compatible with dropper posts, and unobtrusive when no light is attached.

Design

The mount consists of two parts:

  • Saddle rail clamp: Mounted below the saddle to the saddle rails.

  • Light holder: Attached to the clamp using an M5 nut – either with a GoPro thumbscrew or an M5 bolt.

Light Holder Versions

  • Round version: Round cross-section, suitable for lights with rubber bands, that are optimized for seatposts

  • Slim, tapered version: For narrower, suitable for lights with rubber bands, that can be mounted on seat stays

Printing Recommendations

  • Material: PETG, i've also tested ASA but ASA is not better

  • Upper part of the saddle clamp: 100% infill

Required Hardware

  • 2x M4x16 mm screws

  • 2x M4 self-locking nuts

  • 1x M5 nut

  • 1x GoPro thumbscrew or M5 bolt

Assembly

  1. Place the lower part of the clamp below the saddle rails.

  2. Attach the upper clamp part and secure it using the M4 screws and self-locking nuts.

  3. Position the light holder in the desired orientation.

  4. Secure it with a GoPro thumbscrew or an M5 bolt and M5 nut.

  5. Clip or slide in the light and check that it sits securely.

Note: Check the fit and security of the clamp and light before your first ride (the rubber band of your light MUST be tight) Retighten it after your first trail ride.

Tags