PCB UPS based on LX-2BUPS module (5V/9V/12V)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small UPS. It is useful for powering an Internet switch/router or a Meshtastic / MeshCore device during a power outage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
PCB UPS based on LX-2BUPS module (5V/9V/12V)
It is useful for powering an Internet switch/router or a
Meshtastic / MeshCore device during a power outage.
USB Type-C power connector for input.
Attach desired jacket for the output.
The board is placed more to the USB-C site, therefore there is more space
for the output wires inside the box.
There are two versions, one with and one without cooling holes.
Print:
Use PLA or PETG
If you activate the "Make Overhang Printable" setting in the Experimental section you can print without support.
IMPORTANT NOTE:
Use the headless 18650 batteries as they are slightly shorter.
Enjoy,
s10k