PCB UPS based on LX-2BUPS module (5V/9V/12V)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small UPS. It is useful for powering an Internet switch/router or a Meshtastic / MeshCore device during a power outage.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
PCB UPS based on LX-2BUPS module (5V/9V/12V)
It is useful for powering an Internet switch/router or a
Meshtastic / MeshCore device during a power outage.
USB Type-C power connector for input.
Attach desired jacket for the output.
The board is placed more to the USB-C site, therefore there is more space
for the output wires inside the box.
There are two versions, one with and one without cooling holes.
Print:
Use PLA or PETG
If you activate the "Make Overhang Printable" setting in the Experimental section you can print without support.
IMPORTANT NOTE:
Use the headless 18650 batteries as they are slightly shorter.
Enjoy,
s10k