1 / 5
Clicky Poppers - TPU Pop Fidget Pad, Stress Relief Clicker — zdjęcie 1
1 / 5

Clicky Poppers - TPU Pop Fidget Pad, Stress Relief Clicker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hexagon popper pad for flexible TPU: 19 bubbles snap through with a click and pop back. No supports.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A hexagon popper pad made for flexible TPU: 19 hollow bubbles snap through with a click when you press them, then pop back from the other side. A grip rim runs around the edge.

How it works

  • Each bubble is a 45 degree cone with a 1.2 mm shell and a 1.2 mm cap, hollow from below.

  • - In TPU the shell flips through when pressed and holds, then flips back when pushed from underneath.

  • - Rigid PLA will not pop: please print it in TPU 95A (or softer).

Print settings

  • Material: TPU 95A, slow speed (20 to 30 mm/s), retraction low or off

  • - Layer height: 0.2 mm

  • - Walls: 3, infill: 100 % for the sheet

  • - Supports: none. The bubble caps are short 7 mm bridges.

  • - Size: 122 x 108 x 7 mm, about 27 g

Files: STL and 3MF.

Notes: the images are renders of the actual file. Designed with AI-assisted procedural modeling and checked automatically for printability (watertight mesh, overhang analysis, wall thickness).

More designs: Daily 3D STL publishes new 3D printable designs every day. Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models

More fidgets: Snowflake Fidget Spinner (print in place): https://cults3d.com/en/3d-model/game/snowflake-fidget-spinner-print-in-place-no-supports

Tagi