Clicky Poppers - TPU Pop Fidget Pad, Stress Relief Clicker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hexagon popper pad for flexible TPU: 19 bubbles snap through with a click and pop back. No supports.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A hexagon popper pad made for flexible TPU: 19 hollow bubbles snap through with a click when you press them, then pop back from the other side. A grip rim runs around the edge.
How it works
Each bubble is a 45 degree cone with a 1.2 mm shell and a 1.2 mm cap, hollow from below.
- In TPU the shell flips through when pressed and holds, then flips back when pushed from underneath.
- Rigid PLA will not pop: please print it in TPU 95A (or softer).
Print settings
Material: TPU 95A, slow speed (20 to 30 mm/s), retraction low or off
- Layer height: 0.2 mm
- Walls: 3, infill: 100 % for the sheet
- Supports: none. The bubble caps are short 7 mm bridges.
- Size: 122 x 108 x 7 mm, about 27 g
Files: STL and 3MF.
Notes: the images are renders of the actual file. Designed with AI-assisted procedural modeling and checked automatically for printability (watertight mesh, overhang analysis, wall thickness).
More designs: Daily 3D STL publishes new 3D printable designs every day. Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models
More fidgets: Snowflake Fidget Spinner (print in place): https://cults3d.com/en/3d-model/game/snowflake-fidget-spinner-print-in-place-no-supports