Sefie stick. Long. Vasemode.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Telescope Sefie stick. Nearly 1 metter long. Important: In Vasemode, for optimal tight fit, you need about 0.9 mm…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Telescope Sefie stick. Nearly 1 metter long.
Important:
In Vasemode, for optimal tight fit, you need about 0.9 mm wall-thicknes.
This can be done for 0.4 mm nozzle by using Extrution Multiplyer= 1.40 and Extrution With = 0.6.
Use also 1 bottom layer and 0 top layer. Remove the bottom layer after printing.
Se picture for Siplify 3D sliser settings for this.
It is important that all RodPart elements has a tight fit.
For other parts (not vasemode), do not overextrude. (Use Extrution Multiplyer= 1.00 and Extrution With = 0.4), othervise the tread may not fit.
All my GoPro related Things:
GoPro Bike and tripod atachment with quick coupling https://www.thingiverse.com/thing:4570589
Phone stand with screw and GoPro atachment https://www.thingiverse.com/thing:4328023
Phone Atachment to Bike with spring damper https://www.thingiverse.com/thing:4458076
Heavy GoPro Base Stand https://www.thingiverse.com/thing:4693687
Light GoPro Base Stand https://www.thingiverse.com/thing:4696458
DSLR camera Stand with GoPro atatchment https://www.thingiverse.com/thing:4424068
GoPro Attachment system https://www.thingiverse.com/thing:4696725
Ring Light https://www.thingiverse.com/thing:4696747
Sefie stick. Long. Vasemode. https://www.thingiverse.com/thing:4678212
GoPro 360 coupling https://www.thingiverse.com/thing:4697342
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2 og 0.14 for threaded parts
Infill:
20%
Filament: Polymaker Polyflex PLA
Category: 3D Printing