Centauri Carbon Canvas Target Tophat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My attempt at a Tophat for the Canvas unit on the Elegoo Centauri Carbon
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 105
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
This is my attempt at a tophat for the Centauri Carbon with canvas. I wanted a clear top, that is fast to print with minimal filament, and still use the vented riser I first printed when I got the printer. I used this Riser: https://www.printables.com/model/1527230-elegoo-centauri-carbon-vented-riser-smooth
Other risers will work also.
I designed 2 versions to choose from:
The first one can be done with 4 holes (easier) by using the template I included in the files. The template sits on top and the back of the lid, mark the holes, drill pilot holes, and then drill the hole to fit the tubes through.
The second one has a PTFE cover that sits on top of the canvas unit. There is a template for the cutout. You place tape on the side that needs cut, set the cutout template on the side, trace the outside of the template, and use a jigsaw with a metal blade to cut it out.
The container I used was purchased for $13 at Target, https://www.target.com/p/12-34-x-12-34-x-8-34-all-purpose-storage-bin-brightroom-8482/-/A-83279887#lnk=sametab. I didn't build the 4 hole version, I went straight to designing the cutout version (Thank you Kieran Baugh, for trying the 4 hole version). If any adjustments are needed let me know. It did fit on my unit, I will be installing the canvas shortly.
Update: I installed the canvas kit and everything clears, no issues. I am happy with the results. Kieran Baugh sent some photos of the 4 hole version.