ELTAKO 30000412 kompatibler Befestigungswinkel für FTKE / ELTAKO 30000412 compatible mounting angle bracket for FTKE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ELTAKO 30000412 kompatibler Befestigungswinkel für FTKE / ELTAKO 30000412 compatible mounting angle bracket for FTKE
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
ELTAKO 3000412 kompatible Bestigungswinkel für die Enocean Funk-Fenster-Türkontakte FTKE-rw. Ein Modell für (von oben gesehen) Gelenk links und Gelenk rechts.
Drucken am besten mit den Befestigungsnoppen auf dem Druckbett und Stützmaterial.
Benötigtes Befestigungsmaterial:
2 Stk Blechschrauben M2,9 x 9,5 für die Verbindung des FTKE mit dem Adapter
1 Stk doppelseitiges Klebeband zum Verkleben des Adapters auf der Oberseite des Türfalzes
1 Stk Holzschraube 3,0 x 12 Senkkopf, um den Adapter am Türfalz zu sichern
Das Modell findet Ihr auch bei Onshape unter dem Suchbegriff "ELTAKO FTKE Befestigungswinkel".
_________________________________________________________________________________________________________________
ELTAKO 30000412-compatible mounting brackets for EnOcean FTKE-rw wireless window/door contacts.
Two versions are included: one for left-hand hinges and one for right-hand hinges (as viewed from above).
For best print quality, place the mounting studs directly on the print bed and enable support structures.
Required hardware:
2 × M2.9 × 9.5 mm self-tapping sheet metal screws for attaching the FTKE sensor to the adapter
Double-sided adhesive tape for bonding the adapter to the upper side of the door rebate
1 × 3.0 × 12 mm countersunk wood screw to secure the adapter to the door rebate
The model is also available on Onshape. Search for "ELTAKO FTKE Befestigungswinkel".