ELTAKO 30000412 kompatibler Befestigungswinkel für FTKE / ELTAKO 30000412 compatible mounting angle bracket for FTKE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ELTAKO 30000412 kompatibler Befestigungswinkel für FTKE / ELTAKO 30000412 compatible mounting angle bracket for FTKE
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
ELTAKO 3000412 kompatible Bestigungswinkel für die Enocean Funk-Fenster-Türkontakte FTKE-rw. Ein Modell für (von oben gesehen) Gelenk links und Gelenk rechts.
Drucken am besten mit den Befestigungsnoppen auf dem Druckbett und Stützmaterial.
Benötigtes Befestigungsmaterial:
2 Stk Blechschrauben M2,9 x 9,5 für die Verbindung des FTKE mit dem Adapter
1 Stk doppelseitiges Klebeband zum Verkleben des Adapters auf der Oberseite des Türfalzes
1 Stk Holzschraube 3,0 x 12 Senkkopf, um den Adapter am Türfalz zu sichern
Das Modell findet Ihr auch bei Onshape unter dem Suchbegriff "ELTAKO FTKE Befestigungswinkel".
_________________________________________________________________________________________________________________
ELTAKO 30000412-compatible mounting brackets for EnOcean FTKE-rw wireless window/door contacts.
Two versions are included: one for left-hand hinges and one for right-hand hinges (as viewed from above).
For best print quality, place the mounting studs directly on the print bed and enable support structures.
Required hardware:
2 × M2.9 × 9.5 mm self-tapping sheet metal screws for attaching the FTKE sensor to the adapter
Double-sided adhesive tape for bonding the adapter to the upper side of the door rebate
1 × 3.0 × 12 mm countersunk wood screw to secure the adapter to the door rebate
The model is also available on Onshape. Search for "ELTAKO FTKE Befestigungswinkel".