Aquael Glossy 100 – FG167 LED Light Mount Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom adapters for mounting an FG167 LED light above or below the original Aquael Glossy 100 LED frame.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Aquael Glossy 100 – FG167 LED Light Mounting Adapters
These custom 3D printed adapters are designed specifically for the original LED lighting frame of the Aquael Glossy 100 aquarium.
They allow an FG167 LED light to be mounted in two different positions:
Above the original frame – for a higher mounting position.
Below the original frame – for a lower mounting position, which is how I installed mine.
The adapters reuse the existing lighting frame, allowing you to add the FG167 LED light without replacing or permanently modifying the original setup.
Printing recommendations
Material: PETG recommended for improved heat and moisture resistance.
Scale: 100%.
Print the required number of adapters.
Installation
The adapters can be installed either above or below the original Aquael Glossy 100 LED frame, depending on your preferred lighting position.
The photos show my installation with the FG167 mounted below the original frame.
Compatibility
Designed for:
Aquael Glossy 100 aquarium
Original Aquael Glossy 100 LED lighting frame
FG167 LED light
Compatibility with other Aquael aquarium models has not been tested.
Note: This is an unofficial, custom-designed accessory and is not affiliated with Aquael.