1 / 4
EV Charger Cable or Hose Hanging Hooks / Brackets - Top and Bottom — zdjęcie 1
1 / 4

EV Charger Cable or Hose Hanging Hooks / Brackets - Top and Bottom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hanging brackets for hose or EV charger cable

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

I designed the lower bracket for our EV charger.  The lower one features a drain slot to prevent the risk of water pooling against the wall.

Having produced this lower bracket I thought it would be equally suitable as a hanging bracket for other applications.   For the upper bracket I removed the drainage slot and hole.

The bracket will print without support though you may choose to put support in the drainage hole.

I used PETG because I know it will last for a few years outdoors but I will reprint in ASA (for better UV resistance) if necessary.  This is Scotland not Florida!

Tagi