Battery Cover 45×25 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement battery compartment cover, 45×25 mm, with rails and a latch. Print in PLA or PETG.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Fit is untested and may crack in PLA. PETG recommended. Not for button or coin-cell battery compartments. If you print one, please post a photo and say whether it was tight or loose.
A replacement battery compartment cover, 45×25 mm, with rails and a latch. Measure the slot width between the rails before printing.
Print settings: PLA or PETG, printed flat.
Before you print: measure your original part first and print a quick fit test. Not for parts carrying load, pressure, heat or electricity.
Licence: CC BY-NC-ND 4.0, personal non-commercial use.