GLUELESS LOFTYO FIGURE- No glue needed!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Took a REALLY long time, but BAM, the insanely amazing Loftyo Figure does not require glue anymore!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 123
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's the Loftyo, but i fused some stuff and printed it at a 45 degree angle.
That's it!
Yeah, the original Loftyo Figure needed a lot of glue, so I decided to go ahead and model a glueless one, why not? The reason Loft Studios modeled the ball pins separate is because of STRENGTH. If the joint was vertical, the ball snapped, Horizontal, the socket snapped. After about 7 fails, i decided to print the weak joints at a 45-degree angle, and it fixed the issue.
The figure's articulation is slightly limited compared to the original, and the elbows and knees are slightly cut for adhesion, this is a good alternative to the glue version if you don't want to use glue!
(Loft Studios is great by the way, this figure is not mine, I just edited the joints)