7.5" Rocket avbay sled for Quantum & Quasar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avbay sled for a 7.5" rocket with mounts for Eggtimer Quantum and Quasar. Mount holes are sized for 4-40 heat set insert
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Avbay sled for a 7.5" rocket with mounting for Eggtimer Quantum and Quasar. The altimeter and battery box mount holes are sized for 4-40 heat set inserts. I mount them with the same nylon 4-40 screws used as shear pins. The sled can be used with the pin switch mount if desired. Spacers on the all-thread can position the sled and switch mount in the length of your avbay. Avbay uses 2* 5/16" allthread with 4" spacing. The pin switch mount is sized for my pin switch cases. They use the same microswitches as the Lab Rat Rocketry ones so the two 2-56 holes will be the same but the spacing for dual/triple/quad gang cases may not match. The pin switch mount uses 2-56 heat set inserts. I also use 2-56 nylon shear pin screws to mount the switches.
Part sources used:
Heat set insert assortment
extra 4-40 heat set inserts
Heat set tips for my Weller WEP70 soldering iron
5/16-18 SS threaded rod
5/16-18 Wing Knobs
5/16-18 SS hex nuts
5/16 SS washers
Omron SS5GL2 Microswitches
Remove before flight keychain
1/8" SS rod
URGENEX 900mAh 2s lipo batteries
URGENEX 450mAh 2s lipo batteries
VICMILE 450mAh 2s lipo batteries