1 / 6
Low-Noise Fan Grill 120 / 140 mm – Rounded Inlet Profile — zdjęcie 1
1 / 6

Low-Noise Fan Grill 120 / 140 mm – Rounded Inlet Profile

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quieter remix of Noctua's high-efficiency fan grill, with rounded spokes. For 120 and 140 mm fans.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Low-Noise Fan Grill 120 / 140 mm

Even the quietest fan is only as quiet as the parts around it. This grill is a remix of the High-efficiency Noctua 120mm fan grill, redesigned for lower noise and available for 120 mm and 140 mm fans.

What I changed

  • Straight radial spokes instead of crossing spiral struts. Far fewer intersections and edges sit in the airflow.

  • Rounded profile on the intake side, with fillets where the spokes meet the rings. The air flows around the spokes instead of breaking off at sharp edges and forming turbulence.

  • More open area, so the fan has less resistance to work against.

  • 16 spokes, 7 rotor blades. The numbers share no common divisor, so the blades never pass several spokes at the same moment. This keeps tonal noise down. Applies to both sizes.

Measured

Side by side with the original Noctua grill, same fan (ARCTIC P14 Pro PST), 50 cm distance, 3 runs each, smartphone app. Measured on the 140 mm version.

Fan speed (PWM)

Original grill

This grill

Difference

30 %

24.8 dB(A)

23.5 dB(A)

−1.3 dB

50 %

29.5 dB(A)

28.7 dB(A)

−0.8 dB

60 %

31.8 dB(A)

30.4 dB(A)

−1.4 dB

Quieter at every tested speed. At 30 % the fan is practically inaudible in the room either way.

Tested fans

Grill

Fan

Fan size

140 mm

ARCTIC P14 Pro PST

140 × 140 × 27 mm

120 mm

ARCTIC P12 Slim PWM PST

120 × 120 × 15 mm

Dimensions

140 mm grill

120 mm grill

Outer size

140 × 140 mm

120 × 120 mm

Hole spacing

124.5 mm

105 mm

Open diameter

135.5 mm

112 mm

Center opening

42 mm

28 mm

Spokes

16 × 2 mm, fully rounded on the intake side

16 × 2 mm, fully rounded on the intake side

Thickness

2 mm (+ 0.5 mm marking)

2 mm (+ 0.5 mm marking)

Please note: reduced finger protection

This grill is optimized for airflow and low noise, not as a finger guard. The openings at the outer edge are up to 21.5 mm (140 mm) and 17.7 mm (120 mm) wide, so a finger can reach the rotor. Do not use it where children or pets can reach the fan.

Printing

  • PLA (tested), no supports

  • Rounded side down on the bed, "Fanside" marking facing up

  • 0.2 mm layer height, 3 walls, 17 % infill

  • 120 mm: approx. 28 min / 12.5 g · 140 mm: approx. 33 min / 15.5 g on a Creality K2

The 3MF files contain the model only, without a printer profile, so they open in any slicer. They are already oriented correctly: rounded side down.

Mounting

  • The side marked "Fanside" faces the fan, the rounded side faces the incoming air.

  • Mount it on the intake side of the fan.

Credits

Remix of "High-efficiency Noctua 120mm fan grill" by Noctua (printables.com/model/1096961), licensed under CC BY-NC-SA 4.0. Changes: straight radial spokes with rounded intake profile, added 140 mm version. This remix is licensed under CC BY-NC-SA 4.0 by palatinalights.

If you print one, I would love to see your make. Questions and suggestions are welcome in the comments.


Leises Lüftergitter 120 / 140 mm

Selbst der leiseste Lüfter ist nur so leise wie die Teile drumherum. Dieses Gitter ist ein Remix des „High-efficiency Noctua 120mm fan grill", auf geringere Geräusche umkonstruiert und für 120- und 140-mm-Lüfter erhältlich.

Was ich geändert habe

  • Gerade, radiale Speichen statt sich kreuzender Spiralstreben. Deutlich weniger Kreuzungen und Kanten im Luftstrom.

  • Abgerundetes Profil auf der Ansaugseite und Hohlkehlen an den Speichenansätzen. Die Luft umströmt die Speichen, statt an scharfen Kanten abzureißen und zu verwirbeln.

  • Mehr freie Fläche, also weniger Widerstand für den Lüfter.

  • 16 Speichen, 7 Rotorblätter: Kein gemeinsamer Teiler, die Blätter passieren nie mehrere Speichen gleichzeitig. Das hält tonale Geräusche niedrig.

Gemessen am 140er mit ARCTIC P14 Pro PST, 50 cm Abstand, je 3 Durchgänge, Handy-App: bei 30/50/60 % PWM jeweils 1,3 / 0,8 / 1,4 dB(A) leiser als das Noctua-Original. Bei 30 % ist der Lüfter im Raum ohnehin praktisch nicht hörbar.

Getestete Lüfter: ARCTIC P14 Pro PST (140 mm), ARCTIC P12 Slim PWM PST (120 mm).

Hinweis: reduzierter Fingerschutz. Das Gitter ist auf Luftstrom und Ruhe ausgelegt, nicht als Fingerschutz. Die Öffnungen am Rand sind bis zu 21,5 mm (140er) bzw. 17,7 mm (120er) breit, ein Finger erreicht also den Rotor. Nicht verwenden, wo Kinder oder Haustiere an den Lüfter kommen.

Maße: 140er: 140 × 140 mm, Lochabstand 124,5 mm, freier Durchmesser 135,5 mm. 120er: 120 × 120 mm, Lochabstand 105 mm, freier Durchmesser 112 mm. Je 16 Speichen à 2 mm, Dicke 2 mm.

Druck: PLA, ohne Stützen, gerundete Seite nach unten, Markierung „Fanside" oben. 0,2 mm Schichthöhe, 3 Wände, 17 % Füllung. 120er ca. 28 min / 12,5 g, 140er ca. 33 min / 15,5 g auf einem Creality K2. Die 3MF-Dateien enthalten nur das Modell (ohne Druckerprofil) und sind bereits richtig ausgerichtet.

Einbau: Die Seite mit „Fanside" zeigt zum Lüfter, die gerundete Seite zur ansaugenden Luft. Montage auf der Ansaugseite.

Quelle: Remix von „High-efficiency Noctua 120mm fan grill" von Noctua, Lizenz CC BY-NC-SA 4.0. Dieser Remix steht ebenfalls unter CC BY-NC-SA 4.0.

Tagi