Tethered Bottle Cap with Snap-Back Clip – PCO 1881 (28 mm PET neck) – Concept (not print-tested)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Concept tethered cap for PCO 1881 28 mm PET bottles; hook snaps under neck ring when flipped. Not print-tested.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution

An alternative to the EU tethered caps (Directive 2019/904) that keep hitting your nose while drinking.
The cap stays attached to the tamper-evident ring with a short tether band offset by 45°, and a small hook on the skirt is meant to snap under the bottle's support ring when the cap is flipped ~190° down, so it stays out of the way.
Neck standard: PCO 1881 (28 mm, e.g. most 0.5 L soft-drink / malt-drink PET bottles), dimensions checked against a real bottle.
Files: cap, TE ring with tether band, closed assembly (STL + STEP). Parametric CadQuery source available on request.
Status: CONCEPT, NOT PRINT-TESTED yet. Hinge kinematics and snap engagement are unverified.
Print tips: PETG body, tether ideally TPU 95A; layer 0.12 mm; add +0.2–0.3 mm thread clearance. Not food-certified, not for pressurised use.
Designed by Anton Klitin, CAD engineer (mechanical design, CadQuery/FreeCAD). Open to freelance CAD work – feel free to message me.
