1 / 3
Tethered Bottle Cap with Snap-Back Clip – PCO 1881 (28 mm PET neck) – Concept (not print-tested) — image 1
1 / 3

Tethered Bottle Cap with Snap-Back Clip – PCO 1881 (28 mm PET neck) – Concept (not print-tested)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Concept tethered cap for PCO 1881 28 mm PET bottles; hook snaps under neck ring when flipped. Not print-tested.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

An alternative to the EU tethered caps (Directive 2019/904) that keep hitting your nose while drinking.

The cap stays attached to the tamper-evident ring with a short tether band offset by 45°, and a small hook on the skirt is meant to snap under the bottle's support ring when the cap is flipped ~190° down, so it stays out of the way.

Neck standard: PCO 1881 (28 mm, e.g. most 0.5 L soft-drink / malt-drink PET bottles), dimensions checked against a real bottle.

Files: cap, TE ring with tether band, closed assembly (STL + STEP). Parametric CadQuery source available on request.

Status: CONCEPT, NOT PRINT-TESTED yet. Hinge kinematics and snap engagement are unverified.

Print tips: PETG body, tether ideally TPU 95A; layer 0.12 mm; add +0.2–0.3 mm thread clearance. Not food-certified, not for pressurised use.

Designed by Anton Klitin, CAD engineer (mechanical design, CadQuery/FreeCAD). Open to freelance CAD work – feel free to message me.

Tags