Winterizing Screw Plug for Mammotion RTK310 (RBS03) Pole Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Threaded plug that closes the pole socket of a Mammotion RTK310 base when the pole is removed for winter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When you take the antenna pole off a Mammotion RTK310 reference station (RBS03) for winter, the threaded socket in the base is left open to water, dirt and insects. This plug screws into that socket in place of the pole and closes it.
The thread replicates the male thread on the end of the original pole: right-hand, about 18.1 mm major diameter, 3.5 mm pitch, trapezoidal profile with a flat crest. The plug has a 32 mm knurled head for hand tightening.
Status: I measured the pole with calipers and matched the pitch and hand from photos.
Print settings (PETG, Prusa Core One+):
0.15 mm QUALITY profile, 0.4 mm nozzle
- PETG or ASA for outdoor and UV use
- 4+ perimeters, 30%+ infill
- Head down on the bed, thread pointing up, no supports
Tolerance note: printed PETG threads came out about 0.5 mm smaller in diameter than modeled, so this model already includes a compensation for that. If it is too tight or loose on your printer, scale the thread diameter slightly in the slicer.