MKS TS35 housing for Kobra 2 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the mks t35 mount found on makerworld. This one is modified to mount the screen to the Kobra 2 Plus.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I used this model when replacing the stock mainboard in my Kobra 2 Plus with a Robin nano 3.1 mainboard. This just clears the build plate. Some may want it spaced further from the heated bed, but this is as far as it will go with the original screws for mounting the screen to the Kobra 2 plus. If you want the cables to exit the housing directly from the back of the screen just add a negative modifier to the model. Model was Printed with Tinmorry PETG-CF purchased on amazon. Cant recommend this stuff enough. Prints amazing. Print with a nozzle temp of 260 and a bed temp of 85.