Imbissbude für Sturmkind DR!FT & Carrera GO!!!/Hybrid – Imbiss mit Verkaufsklappe & Zubehör 1:43 & 1:87 (H0) – mehrfarbig 3MF / Snack Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imbissbude mit beweglicher Verkaufsklappe, Theke, Stehtischen, Mülltonne & Getränkekisten – 1:43 & 1:87 (H0), gratis.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Imbissbude – eine Imbissbude im Holzbuden-Look für deine Rennbahn, Kirmes oder Modellbahn: Holzverschalung, dunkles Dach mit "IMBISS"-Schild, rote Verkaufsklappe mit Stützen, Theke, Küchenzeile, Seitentür und Fenster. Dazu Zubehör: 2 Stehtische, Mülltonne, Gasflaschen und Getränkekisten-Stapel.
Enthalten:
Maßstab 1:43 (Drift-RC / Slotcar) – 16 STL-Dateien + farbige 3MF, 17 Druckteile, Bodenplatte ca. 9 × 8 cm
Maßstab 1:87 (H0 Modellbahn) – 16 STL-Dateien + farbige 3MF, 17 Druckteile, Bodenplatte ca. 4,4 × 4 cm
STL-Dateien mit Farbe im Dateinamen (z. B. klappe__rot.stl) und eine farbige 3MF mit allen Teilen und hinterlegten Filamentfarben – direkt für AMS/MMU oder einfarbig druckbar
Farbliste je Maßstab (Stückzahlen, Farben, Materialbedarf) und bebilderte Druck- und Aufbauanleitung (PDF)
Features:
Beweglich: Die Verkaufsklappe schwenkt auf einem Filament-Stift und wird von zwei Stützen offen gehalten
Komplett zerlegbar (Wände stecken in der Bodenplatte, das Dach hält alles zusammen), stützfrei (FDM-optimiert)
Rennbahn-Tasche für die Schwalbenschwanz-Clips der gesamten Rennbahn-Deko-Reihe
Kompatibel: Die 1:43-Version passt z. B. zu Sturmkind DR!FT (Drift), Carrera GO!!! (Go) und Carrera Hybrid.
Snack Bar – a wooden snack bar for your race track, fairground or model railway layout: board cladding, dark roof with "IMBISS" sign, red serving hatch with struts, counter, kitchen unit, side door and window. Accessories included: 2 bar tables, waste bin, gas bottles and a stack of drink crates.
Included:
Scale 1:43 (drift RC / slot car) – 16 STL files + multicolour 3MF, 17 printed parts, base approx. 9 × 8 cm
Scale 1:87 (HO model railway) – 16 STL files + multicolour 3MF, 17 printed parts, base approx. 4.4 × 4 cm
STL files with the colour in the file name (e.g. klappe__rot.stl) and a multicolour 3MF with all parts and filament colours stored – ready for AMS/MMU or single-colour printing
Colour list per scale (quantities, colours, filament usage) and illustrated print & assembly guide (PDF, German)
Features:
Moving parts: the serving hatch pivots on a filament pin and is held open by two struts
Fully modular (walls plug into the base, the roof holds everything together), support-free (FDM-optimised)
Race track pocket for the dovetail clips of the whole race track deco series
Personal use only – no resale of files or printed parts.
Compatible: The 1:43 version fits e.g. Sturmkind DR!FT (Drift), Carrera GO!!! (Go) and Carrera Hybrid tracks.
Markenhinweis: Sturmkind, DR!FT, Carrera, Carrera GO!!! und Carrera Hybrid sind Marken bzw. eingetragene Marken ihrer jeweiligen Inhaber. Dies ist ein unabhängiges Produkt ohne Verbindung zu oder Unterstützung durch diese Unternehmen; die Namen dienen nur zur Angabe der Kompatibilität.
Trademark notice: Sturmkind, DR!FT, Carrera, Carrera GO!!! and Carrera Hybrid are trademarks or registered trademarks of their respective owners. This is an independent product, not affiliated with or endorsed by them; names are used for compatibility reference only.
Druckeinstellungen / Print settings:
FDM, PLA (oder PETG) / PLA or PETG
Druckbett mind. / bed min. 220 × 220 mm
Schicht / layer 0,2 mm (Feinteile / small parts 0,12–0,16 mm), Düse / nozzle 0,4 mm
Füllung / infill 15 %, 3 Wände / walls; Brücken-Einstellungen aktiv lassen / keep bridging enabled
KEINE Stützen / NO supports – Teile sind bereits druckfertig ausgerichtet / parts are pre-oriented
Mehrfarbig mit AMS/MMU: Farben der Teile den Slots zuordnen; ohne AMS: alle Teile einem Extruder zuweisen
Multicolour with AMS/MMU: map part colours to your slots; single colour: assign all parts to one extruder
Mehrfarbige Teile (_A/_B…) als EIN Objekt laden / load multicolour parts (_A/_B…) as ONE object
Klappenstift aus Filament Ø 1,75 mm: ca. 49 mm (1:43) bzw. 24 mm (1:87) / hatch pin from 1.75 mm filament
Nur Deko, kein Spielzeug für Kinder unter 3 Jahren (Kleinteile) / Decoration only, small parts – not for children under 3
