1 / 4
Imbissbude für Sturmkind DR!FT & Carrera GO!!!/Hybrid – Imbiss mit Verkaufsklappe & Zubehör 1:43 & 1:87 (H0) – mehrfarbig 3MF / Snack Bar — image 1
1 / 4

Imbissbude für Sturmkind DR!FT & Carrera GO!!!/Hybrid – Imbiss mit Verkaufsklappe & Zubehör 1:43 & 1:87 (H0) – mehrfarbig 3MF / Snack Bar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Imbissbude mit beweglicher Verkaufsklappe, Theke, Stehtischen, Mülltonne & Getränkekisten – 1:43 & 1:87 (H0), gratis.

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Imbissbude – eine Imbissbude im Holzbuden-Look für deine Rennbahn, Kirmes oder Modellbahn: Holzverschalung, dunkles Dach mit "IMBISS"-Schild, rote Verkaufsklappe mit Stützen, Theke, Küchenzeile, Seitentür und Fenster. Dazu Zubehör: 2 Stehtische, Mülltonne, Gasflaschen und Getränkekisten-Stapel.

Enthalten:

  • Maßstab 1:43 (Drift-RC / Slotcar) – 16 STL-Dateien + farbige 3MF, 17 Druckteile, Bodenplatte ca. 9 × 8 cm

  • Maßstab 1:87 (H0 Modellbahn) – 16 STL-Dateien + farbige 3MF, 17 Druckteile, Bodenplatte ca. 4,4 × 4 cm

  • STL-Dateien mit Farbe im Dateinamen (z. B. klappe__rot.stl) und eine farbige 3MF mit allen Teilen und hinterlegten Filamentfarben – direkt für AMS/MMU oder einfarbig druckbar

  • Farbliste je Maßstab (Stückzahlen, Farben, Materialbedarf) und bebilderte Druck- und Aufbauanleitung (PDF)

Features:

  • Beweglich: Die Verkaufsklappe schwenkt auf einem Filament-Stift und wird von zwei Stützen offen gehalten

  • Komplett zerlegbar (Wände stecken in der Bodenplatte, das Dach hält alles zusammen), stützfrei (FDM-optimiert)

  • Rennbahn-Tasche für die Schwalbenschwanz-Clips der gesamten Rennbahn-Deko-Reihe

Kompatibel: Die 1:43-Version passt z. B. zu Sturmkind DR!FT (Drift), Carrera GO!!! (Go) und Carrera Hybrid.


Snack Bar – a wooden snack bar for your race track, fairground or model railway layout: board cladding, dark roof with "IMBISS" sign, red serving hatch with struts, counter, kitchen unit, side door and window. Accessories included: 2 bar tables, waste bin, gas bottles and a stack of drink crates.

Included:

  • Scale 1:43 (drift RC / slot car) – 16 STL files + multicolour 3MF, 17 printed parts, base approx. 9 × 8 cm

  • Scale 1:87 (HO model railway) – 16 STL files + multicolour 3MF, 17 printed parts, base approx. 4.4 × 4 cm

  • STL files with the colour in the file name (e.g. klappe__rot.stl) and a multicolour 3MF with all parts and filament colours stored – ready for AMS/MMU or single-colour printing

  • Colour list per scale (quantities, colours, filament usage) and illustrated print & assembly guide (PDF, German)

Features:

  • Moving parts: the serving hatch pivots on a filament pin and is held open by two struts

  • Fully modular (walls plug into the base, the roof holds everything together), support-free (FDM-optimised)

  • Race track pocket for the dovetail clips of the whole race track deco series

Personal use only – no resale of files or printed parts.

Compatible: The 1:43 version fits e.g. Sturmkind DR!FT (Drift), Carrera GO!!! (Go) and Carrera Hybrid tracks.


Markenhinweis: Sturmkind, DR!FT, Carrera, Carrera GO!!! und Carrera Hybrid sind Marken bzw. eingetragene Marken ihrer jeweiligen Inhaber. Dies ist ein unabhängiges Produkt ohne Verbindung zu oder Unterstützung durch diese Unternehmen; die Namen dienen nur zur Angabe der Kompatibilität.

Trademark notice: Sturmkind, DR!FT, Carrera, Carrera GO!!! and Carrera Hybrid are trademarks or registered trademarks of their respective owners. This is an independent product, not affiliated with or endorsed by them; names are used for compatibility reference only.

Druckeinstellungen / Print settings:

  • FDM, PLA (oder PETG) / PLA or PETG

  • Druckbett mind. / bed min. 220 × 220 mm

  • Schicht / layer 0,2 mm (Feinteile / small parts 0,12–0,16 mm), Düse / nozzle 0,4 mm

  • Füllung / infill 15 %, 3 Wände / walls; Brücken-Einstellungen aktiv lassen / keep bridging enabled

  • KEINE Stützen / NO supports – Teile sind bereits druckfertig ausgerichtet / parts are pre-oriented

  • Mehrfarbig mit AMS/MMU: Farben der Teile den Slots zuordnen; ohne AMS: alle Teile einem Extruder zuweisen

  • Multicolour with AMS/MMU: map part colours to your slots; single colour: assign all parts to one extruder

  • Mehrfarbige Teile (_A/_B…) als EIN Objekt laden / load multicolour parts (_A/_B…) as ONE object

  • Klappenstift aus Filament Ø 1,75 mm: ca. 49 mm (1:43) bzw. 24 mm (1:87) / hatch pin from 1.75 mm filament

  • Nur Deko, kein Spielzeug für Kinder unter 3 Jahren (Kleinteile) / Decoration only, small parts – not for children under 3

Tags