Kraken Benchy – Tentacle Sea Monster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Release the Kraken!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A little boat. A very large problem.
Kraken Benchy turns the familiar little boat into a miniature sea-monster scene. Detailed tentacles curl around the hull and climb over the cabin, while a large slit-pupil eye watches from the bow. Recessed wood grain gives the boat a weathered, nautical character.
Details to explore:
• Three-dimensional curling tentacles with sculpted suckers.
• A large eye integrated into the bow.
• Wood-grain detail across the hull and cabin, with engraved roof lines.
• An open cabin and detailed deck.
• 3Dwake branding on the underside.
The boat and tentacles print together as one piece. There is no assembly or gluing, and a single filament colour is enough to bring out the sculpted details. No AMS is required. The example shown in the photographs is blue; choose any colour you like.
Printing notes
Print upright, with the bottom of the hull on the build plate. The free tentacles create overhangs, so local supports may be needed. Check the sliced preview carefully, particularly beneath the curled tips and around the cabin. This is not advertised as a support-free model.
Remove supports carefully around the thin tips. The model is intended as a decorative collectible rather than a standard Benchy calibration test.
based on https://www.printables.com/model/3161-3d-benchy