1 / 4
ForgeStack Baseplate 4×4 — Modular Parts Bin Grid Plate, Support-Free — zdjęcie 1
1 / 4

ForgeStack Baseplate 4×4 — Modular Parts Bin Grid Plate, Support-Free

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ForgeStack 4×4 baseplate: 160 × 160 mm grid plate with 16 locating pins for modular parts bins. Support-free.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

The bench-size ForgeStack baseplate: a 160 × 160 mm grid plate (4 × 4 cells) with sixteen square locating pins. Arrange any mix of ForgeStack bins on it — pen cup, 1×2, 2×2, divided 2×3 — and rearrange in seconds: bins lift off and drop back on anywhere on the grid.

**Print details**

- Designed for support-free FDM printing. Slicer-validated (OrcaSlicer, 0.4 nozzle, 0.2 layer, PLA) — community printing in progress: be one of the first to print it and share your make!

- Plate: 160 × 160 mm, 4 mm thick, with sixteen locating pins (11 × 11 mm, 4 mm tall) on the 40 mm grid

- Holds, for example, four 2×2 bins, or a divided 2×3 + a 2×2 + a pen cup — any cell-aligned mix

- Flat underside — sits stable as-is, or fix it down with double-sided tape

- The ForgeStack system: every module is built on a 40 mm grid. Baseplates carry square locating pins (11 × 11 mm, 4 mm tall) at the cell centres; every bin underside has matching square sockets (12 × 12 mm, 4.5 mm deep) — a drop-in fit with 0.5 mm clearance per side, no press-fit, no hardware.

- No bridges, no overhangs past 45° — every surface is vertical, horizontal, or sloped at 51° or steeper.

- Watertight/manifold mesh — slices clean in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura

- Listing images are renders of the actual model geometry, not photos of a print — your Makes will be the first real photos

**Original design** — modelled from code, all rights reserved. The rest of the ForgeStack system is free on my profile too: baseplates in 3×2 and 4×4, bins in 1×2, 2×2 and a divided 2×3, a 1×1 pen cup module, a hanging bin and its wall rail — plus the Desk Cable Clip, the Modern Ribbed Planter Pot, the Stackable Storage Box and the Square Dice Tray. Every one of them support-free.

**License:** CC BY-NC 4.0 — free for personal use: print as many as you like for yourself and as gifts. No selling of prints, and no redistribution or sharing of the files.

Tagi