2006-2012 Ford Fusion Morel Maximo Ultra 603 MKII Speaker Pods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's what I made for installing the Morel Maximo Ultra 603 MKII 3-way component speakers in my 09' Ford Fusion.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project should be applicable to any 2006-2012 Ford Fusion.
The model is symmetric, so just mirror for each side.
I provided the 3d scan of my a-pillar in case you want to use the geometry for your own build. The fidelity isn't the best (it was from my phone).
IIRC, I used M6 bolts to attach the door speaker adapters. You need to drill out the rivets on the OEM speaker adapter for this install.
Heatset inserts were used, but I don't recall the exact ones I used, so feel free to modify the holes in the CAD for your application.
I used 2 tubes of JB PlasticWeld to attach the speakers to the a-pillar (one per side).
I attached a frequency response that I measured in the cabin. I'm running the included passive crossover with a 13-band EQ from my headunit and a 15" sealed subwoofer and a 5-channel amp. This setup would greatly benefit from a DSP, but it sounds great as is.
https://www.crutchfield.com/p_210MU603/Morel-Maximo-Ultra-603-MKII.html?omnews=16032618