2006-2012 Ford Fusion Morel Maximo Ultra 603 MKII Speaker Pods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here's what I made for installing the Morel Maximo Ultra 603 MKII 3-way component speakers in my 09' Ford Fusion.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This project should be applicable to any 2006-2012 Ford Fusion.
The model is symmetric, so just mirror for each side.
I provided the 3d scan of my a-pillar in case you want to use the geometry for your own build. The fidelity isn't the best (it was from my phone).
IIRC, I used M6 bolts to attach the door speaker adapters. You need to drill out the rivets on the OEM speaker adapter for this install.
Heatset inserts were used, but I don't recall the exact ones I used, so feel free to modify the holes in the CAD for your application.
I used 2 tubes of JB PlasticWeld to attach the speakers to the a-pillar (one per side).
I attached a frequency response that I measured in the cabin. I'm running the included passive crossover with a 13-band EQ from my headunit and a 15" sealed subwoofer and a 5-channel amp. This setup would greatly benefit from a DSP, but it sounds great as is.
https://www.crutchfield.com/p_210MU603/Morel-Maximo-Ultra-603-MKII.html?omnews=16032618