1,043 models
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
There is an update version of this model: Flat-Edged AirPods Pro (2) Case 2.0 Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…
This is a printable case for the AirPods 4. Since the cases stayed the same between the gen 4 and the gen 5 AirPods this case will fit both. It should stay on without any need for glue or double sided tape and features cutouts for the…
I wanted to print my own nuts & bolt for my camera and tripod. With Fusion 3D it is very easy to create them, but once you print you have to consider also tollerances. I tried few times and at the end I found that you have to reduce the…
I challenged myself to create fake AirPods and a matching case to bamboozle my friends. I'm sure it will get a good laugh! Remixed original AirPod 3D design on Thingiverse and then created a case from scratch. I recommend using supports…
Fits into the Model 3/Y center console wireless charging pads and holds AirPods Pro in exactly the right spot to charge wirelessly. Given the extreme environment in a vehicle, high-temperature filament such as PETG is very strongly…
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as an MMU print, or single color!
I was not able to test this case with real AirPods Pro 3 yet. So if you decide to print this model, please give me some feedback. This is a printable case for the AirPods Pro 3. The top is designed to click right onto the AirPods Case,…
Description Printable case for Apple's latest Airpods model (the 2025 Apple AirPods Pro 3). The photo shows the “glove fit” version. The Airpods case simply slides in and fits snug like a glove and adds a 1mm protective shell all around…
Best fit with apple leather case Prints without supports on the side. I added Gcode for Prusa Mini and i3 Mk3s If you want a stand for just the iPhone: https://www.prusaprinters.org/prints/128413-iphone-stand
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
These are my settings: TPU 0.6 nozzle 4 walls 6 top/bottom layers steam position - aligned support true (only on the build plate)
When printing, use either rafts or a brim and add supports. Just leave them as they are when slicing. Thank you so much for 100 downloads! Buy me a coffee!
This product allows you to charge your AirPods Pro on the Tesla Model Y wireless charger without them falling out during the drive. Several designs are available. The original design was created by Nuno. I made some modifications to the…
Supports are needed
This case is designed for Apple Airpods Pro and will only work if printed with TPU. Supports are needed. It may some time for the TPU to stretch out and form for a proper fit around your AirPods. Disclamer : I am not responsible for any…
The design consists of 4 pieces, thinking about standard printers. Compact stand for Apple Watch (44mm) and AirPods Base to make the support more stable and join it with the iPhone part Wireless charging support for iPhone. Base to make…
Airpods Pro Case with the Google dinosaur
Combined Stand for iPhone, Apple Airpods and Apple Watch. For Wireless loading an IKEA NORDMÄRKE QI-Charger is used. Works great with iPhone 8 and iPhone Xs (also with original Apple Case). For Watch and AirPods the original loading…
Univerzální podstavec pod figurku Universal pedestal under the figurine
Note: I haven't used this in several years and as you can see in the photo, they worked for my headphones. Seems like they might not work for yours. The Fusion 360 F3D file is in the files section if you want to fix it. Needed something…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
This stand is designed to hold a pair of AirPods Max and charge them at the same time. The model consists of 4 separate parts. Each ear cup is seperated so they may be printed in a softer material like TPU. The base is split in half so…
When I am running, sometimes my AirPods Pro are falling, so I have designed this ear holder. I have added 7 different sizes. Print it with support (for the arm) in some flex materials like TPU. You can print in PLA or PETG but it is less…
A 1x2 holder for my AirPods Pro Case
Printable case for Apple 1st and 2nd gen with flat edges. I've designed two versions, one for the AirPods 1 (no hole for the LED) and one AirPods 2. Their dimensions are identical. The model is designed to be printed in PLA and fits…
I like to use metal Mini Toolboxes to organize my desk and more. I desined some drop-in sidepods for the US General (Harbor Freight) and Kobolt (Lowes) versions of the mini toolboxes. You can attach add magnets (holes included) or just…
This is a sleeve for the Apple AirPods 3rd generation. I printed them in Ninjaflex 85A (shore hardness). Other flex materials might work aswell. I also added modifier to generate a cutout for the charching LED and / or a engraving of your…
I was not satisfied with other seed pod designs for Aerogarden, so I designed my own. The spiral structure is designed to be sturdy for printing without any supports - very low risk of spaghetti as it prints. It fits these seed starter…
This is the new version of my AirPods Pro dock and Apple Watch charger. Supports are only needed fot the parts that are touching buildplate. A layer height of 0.24 is recommended, you shouldn't go higher than that. I printed it with a…
This is a little charging station for your AirPods (2nd Gen/Pro). The pegs at the back are to push out the case once the AirPods are charged. Almost all of the pieces are friction fitted, but you can put some glue on the visor and base…
3D print custom accessories for AirPod Max headphones! These ear covers and headbands are LEGO compatible so you can personalize your headphones! Use LEGO DOTS tiles to make mosaic works of art and adorn them on your ears with 3D printed…
This is feet (legs) for the Insta360 invisible selfie sticks, remixed from Mini Tripod 150mm by DiAleksi. With this, you can give your invisible selfie stick (monopod) feet so that it can stand the Insta360 camera upright. I use this for…
Update: 01/07/2024 Added another beta version that replaces the Apple Watch charger with a Galaxy Watch charger (slightly wider and deeper). This version also widens/lengthens the slot the houses the area when the cord meets the puck. I…
Credit for this design goes to https://www.thingiverse.com/jburd/designs and https://www.thingiverse.com/grevtech/designs for adding the cable route organizer. I added another magsafe charging dock on the base for airpods/pro/gen3. Rotate…
Apple Airpods Max Headphone Hangar Printed in Prusament Recycled PETG .2mm layers 20% gyroid infill Printed flat on the closed back I carefully measured and modeled a hangar for Apple Airpods Max noise-cancelling headphones. When in…
This is a remixed model. I removed the dinosaur from the case and adjusted the height of both pieces for a good fit. I printed with adaptive layer height at 0.2 quality on the X1C. I reccomend printing with the position as they are in the…
This is a charging stand for the Airpods Pro. This is very simple to print and the charging cable is secured by the wedge to make it easy to install and remove the cable yet still hold it securely. Print instructions This is a very simple…
Bottom part is friction fitted, top might need a strip of double sided tape to ensure hold.
Charging station designed for holding iPhone with MagSafe, Apple Watch (all models) and AirPods (not pro). No supports needed during printing. I printed with: material: PLA nozzle: 0.4 mm layer height: 0.24 mm (first layer: 0.28 mm)…
🎧A shoulder-mounted pod where the AirPods case becomes the missile launcher . A fun, clean visual upgrade for your Mobile Exo Suit. Printing Instructions Print in PLA or PETG at 0.2 mm layer height , 3 walls, lightning infill. No…
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank. This is version one, and I recommend increasing…
If you own a pair of AirPods Max, then you know that over time the headband mesh loses support. This insert is designed to provide additional cushioning so that the APM headband doesn't rest directly on your head. It's super simple to…
Two-piece to be able to print without support. Glued with super glue (CA), so it is as stable as printed. Dimensions from the Airpods case, as I have already loaded some inaccurate holders 60,3mm x 45mm x 21,5mm The four corner radiuses…
Remixed from CarlTheCreator's AirPod Charge Dock . Took 20 mm off the back so that the AirPods case could open while charging. Rotated the thing 126.5 degrees to make it sit flat on the print bed. Put some small 3M Command Strip adhesives…
Honestly, I was just messing around and made the case for these. It is exactly what the name says. NOTE: Make sure you have "Print thin walls" turned on in your slicer settings or a couple of spots on the lid of the case will not print…
The model is created for resin 3D printing. It fits on AirPods Pros tightly. If you have any problems with the model, feel free to comment!
High quality, 1:1 reproduction of the Airpods charging case. Use it to design your own protector from TPU!
This is an improvement over my previous phone stand. It incorporates the stock puck charger for the apple watch as well as the stock charger plug for airpods pro to allow mounting/charging of all at once. This prints without supports and…
This is a model for a cover with a perfect fit, so ,before you print, check the flow on your printer; the hole for lightning port is more larger for the new usb-c/lightning original cables ( a bit “chubby” than the older) i tried with…
Ultimate Apple Dock/ Nightstand iPhone | Apple Watch | AirPods Pro 1, AirPod Pro (non wireless charging) and Apple Watch dock by Freddy https://www.printables.com/model/99062-dock-for-airpods-pro-all-generations-and-apple-wat/files 2,…
This is a remix of @Freddy dock to better fit Apple Watch Ultra. Apple Watch Ultra is 6mm wider than the previous models. This means, the original stand was positioning the charger with 3mm offset to the watch back. This leads to slow…
This is a earbud cleaner tool. It has a curved hook on one side to remove any debris that may be on your earbuds. It has a brush/scraper on the other side. This works great with AirPods from any generation and most other earbuds. PRINTS…
Gridfinity is life, gridfinity is power. I'm converting my office “quick grab stuff” cupboard to gridfinity, which means I needed a holder for my AirPods Pro case. Other airpods gridfinity options exist, but they typically mount the case…
AirPods Pro 3 case Included are fully editable: Fusion 360 model .f3d full AirPods Pro 3 Cutter model (negative for cutting new cases) Enjoy!
Stand for Apple Airpods Pro. The hole in the bottom is meant to be able to accommodate a standard Apple lightning cable plug. Printed with PLA+ on Creality Ender 3 Pro. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
V1---is very tight V2---needs double-sided tape This is a MagSafe charging dock that is compatible with iPhone, Apple Watch, and AirPods. Additionally, I have also uploaded a MagSafe charging dock for iPhone and Apple Watch that…
a slim case for Airpods Pro 2 Gen in my case the USB-C version Cutouts for the speakers as well as the status LED and pairing button. Designed for an optimal fit when printed with PLA The lower part does not require any supports if the…
Attaches an AirTag to the bare AirPods or AirPods Pro case. I had been using this ( https://www.thingiverse.com/thing:4648274 ) with a Tile Mate, and wanted something similar for the AirTags. Print in a flexible material. 100% scale with…
After downloading and printing an airpods/watch dock from thingiverse, I recognized that the hole for the watch charger was to big. so i decide to designed one from scratch and decided to share the fusion 360 file so everybody can…
Primary for EarPods, but for other headphones too. Perfectly fits in iPhone box. Cable lock tutorial: https://youtu.be/Ntaw8hiONeI Inspired by Apple Inc. Print instructions 3D model doesn't need supports
A remix of the Aeropod model by @gglockner which incorporates a shroud inspired by @755123BE 's model. (Feb 2025 Update) I added a model for an optional algae cover. Print it out of TPU and sleeve it over the pod, then place the…
If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…
A desktop stand that can accommodate an Apple iPhone Magsafe charger, Apple Watch Charger, and Airpod lightning charger refers to a desktop stand designed to hold and charge multiple Apple devices, including an iPhone with Magsafe…
Adjustment of the storage for the Apple Watch/AirPods charger. Úprava uložení nabíječky pro Apple Watch/AirPods
Replacement tips for Apple AirPods Pro 1. and 2. Generation in three sizes S/M/L that I made for my guests to sanitarily use my AirPods. Print in TPU or TPE for squishy, comfortable fit. M size should fit in general, S is for kids in my…
Description *There are two versions : one with the same design on the back, but which does not work with apple watch wireless charger, and another one with a thin back which works for wireless charging . ( tested it personally with apple…
Sport add-on to the AirPods 4s, I will be coming out with more generations soon(mostly the newer ones). Place the AirPods in, mayweed to clean the inside of the hole, it works, if all else fails, with proper precautions, grab a lighter,…
This was measured and designed with a dbrand skin on my case and for the stock apple charging cable to go through the slot (other brand cables may have larger cable diameters or larger end, uh, aglets(..?) that connect the cable to the…
I printed this in TPU 95A from Esun. It fits perfectly on my AirPods Pro (Gen 2). It is an easy print with no supports needed.
A set of printed parts to form your own airpods pro case. All you need are these parts, a patch of leather and some tiny clamps. You have to wet the leather by placing it in a bowl of water for a couple of minutes. After that, you place 2…
Designed against an AirPods G1 case, works with G2 as well. Interference fit locks the sleeve in place. Small latch on top portion fits into the front gap to make it easier to open. Meant to be printed with a flexible thermoplastic. Print…
A charging dock for AirPods Max. Slide the right headphone down this dock and click it into place. You'll need Apple's USB-C to Lightning cable. Other cables may work, but the model is designed to fit this specific cable. You'll also want…
Original was too tight so made this with more tolarance.
A design from Scratch. I began modifying another model but i realized is better to start a new one from scratch. Because the amazon base has a strong light, i made a cap to make possible sleep near the stand without the annoying light…
Altered an already good design to make it modular using dovetail joints. Each dispenser comes as a pair. There are two different sizes to address varying carton dimensions - 61mm x 60mm and 61mm x 65mm (No idea why Nespresso they did…
An Airpod Pro holder for the Ikea Skadis pegboard. It will fit like a glove. Charger cable will fit in the hole on the bottom. Fusion360 file is added for you to modify. If you need help…just ask me. I added a model (upon request) that…
Designed my own Ninja Thirsti pods tray, it holds 10 pods. The diamension is a perfect fit, so material diamensional shrinkage need to be adjusted in slicer before print. I printed it with PETG, material doesn't matter. The model is…
This adapter converts the Right Bank of the Tesla phone charging banks on the Series 3 to hold an Airpods recharging case. See photos. It is a fit in place adapter that is easily removed and installed. May fit other Tesla with the same…
The design is kept very minimalistic. The cable fits through nicely, with no force needed. It is designed for the 2024 MagSafe, but feel free to let me know if it also fits the older version Now it became a double charger and some updates…
pretty simple 2 pieces, it has a charger hole and that is basically it, it works best in TPU
print the "corp 1" with support, print the "corp 2 " twice. saok your 2 piece of leather, and press a sandwich: corp 2 leather piece first corp 1 leather piece second corp 2 let dry the sandwich with pressure at least 24 hours. you have…
I reworked the design from dextr327 to fit the IKEA skadis
A remix of the USB-C connector based version from @ChrisBoorman_136327.
Recommend to print in the same orientation as in the stl file. The _Curved_ shapes are easier to print, require no support. A3PSC_Bottom may need some support depending on your printer.
Airpods Pro now supported as well. !!!! Note that the AirPods Pro is untested as i do not own them !!!! Normal AirPods: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi.stl AirPods Pro: Apple_3_In_1_Charging_Dock_Ikea_Livboj_Qi_Pro.stl This is…
Under desk mount for Airpods Max Headphone
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as a non mmu print
Pokud byste chtěli udělat logo na přání, napište do komentářů a já až budu mít čas, tak ho zde doplním.
I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…
A simple supportless case for the AirPods pros, to protect the charging case from scratches and the like. Printed out of NinjaTek Cheetah (95A) TPU, which seems to be the optimal softness (though I haven't tested this case with any other…
A Simple AirPods Pro Stand and Charging Dock for 1. or 2. Generation :D The hole in the bottom is meant to be able to accommodate a standard Apple lightning cable plug.
ALL the Galastropods from SystemEra's Astroneer, including EVA! I extracted these models from the game, cleaned up, repaired, smoothed the texture, and made printable. Enjoy! Sylvie Usagi Stilgar Princess Rogal Bestefar Enoki
Slim MagSafe charger stand for good heat dissipation. Also has little shelf for wireless AirPods charcing. Needs mounting on surface so there are two versions one with adhesive tape recess in bottom part and one version with screw hole…
This is a Vertuo Pod dispenser that holds three (3) separate boxes of pods. PLA at .15 layer height and 15% infill.
Minimal Air pods Pro case that allows you to connect it with a keychain. Print on top face with no supports. Works with this charging doc: https://www.printables.com/model/603890-magsafe-airpods-garmin-charge-station
AIRPODS MOLLE / BELT CLIP GEN 1 & 2 no supports needed. I Printed with brim. And a Car Charger / Holder for it https://www.printables.com/model/367649-airpods-molle-clip-car-holder-and-charger
