The part where the battery goes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This isn't the entire Chinese remote control - it's just the part where the battery goes.
- Ocena
- 0 / 5
- Polubienia
- 101
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
For those who have lost or broken the insert for a Chinese LED strip (backlight) remote control—the part where the battery is inserted.
There are two versions of this model:
One with slots for both a small CR1220 battery (which is a pain) and a large battery if you cut out the unnecessary part. (Just like the original, but easier to remove from the remote’s casing.)
The second version has only a slot for large CR2025 batteries. (For those who want to forget about replacing batteries for years.)
Printing:
You’ll need a minimal layer height and a low print speed—about 50 mm/s. I printed with a 0.4 mm nozzle and used PETG filament (because it’s flexible enough).
Update: The text is clearer, and the models are better!