LuckFox PicoKVM Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d Printed Screen for the LuckFox PicoKVM. Useful if you purchase the bearbones version of the unit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I ordered myself the LuckFox PicoKVM Base module which comes without a screen or an enclosure. Then I ordered a screen separately and designed this case for fittign everything together.
The separately sourced screen works just fine (no firmware blocks):
The case is a snap fit case and the design was done using a silk PLA which allowed for a tight fit of the displayinot the slot. When I printed with another filament the screen's fit was a bit looser so just tack it down with a bit of AC glue.
The yellow part slots back horizontally into the back panel (Case Lid) and snaps closed. There are cutouts which allows the yellow poart to slide into the black part without vertical movement e.g., this holds the snapfit in place.