MUSHROOM SHIFT – Fly-Agaric Mushroom Shifter Knob for Thrustmaster TH8S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power-up your sim rig! A Fly-Agaric toadstool shift knob designed for the Thrustmaster TH8S. Upright, support-free print
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Power-up your sim rig. A fly-agaric toadstool, 69 mm tall, with a domed red cap and raised spots, a ribbed ring and a cream stem, in the spirit of every racing game that ever handed you a mushroom boost.
Grip and comfort: the 54 mm round cap fills your palm, the raised spots give your skin something to catch, and the slim stem lets your fingers wrap around for pull-shifts. Gill ribs run radially under the cap.
Round on purpose: no orientation to worry about, so it looks right however far the thread seats.
Fits the official adapter: thread socket, shoulder and neck cavity taken from Thrustmaster's own Samurai knob. Checked against the official adapter at its seated height: 0.3 mm thread clearance, 0.1 mm on the neck.
Two-colour print: swap filament at 33.0 mm: cream stem and ring below, red cap above. For white spots, paint the tops or pause-and-swap on a spot-by-spot basis.
Print-friendly: upright, no supports. The ring underside and cap underside sit at about 45° or shallower; the small spots near the cap rim have 1.3 mm lips that print fine without supports.
Print settings
0.4 mm nozzle, 0.2 mm layers, PLA, 5 perimeters, 15 % infill, as Thrustmaster recommends. Adapter at 100 % infill. No supports. Ironing on the dome tops looks great.
Install
Fit the official adapter (Thrustmaster's PDF), then screw the knob on by hand. No pressure needed.