1 / 6
modular kalimba beta — zdjęcie 1
1 / 6

modular kalimba beta

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

kalimba suitable for experiments

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Share Alike

introduce

I am presenting a model for a fully 3D-printable, modular kalimba (thumb piano). This project is, first and foremost, an attempt to create a kalimba that is well - suited for experimenting with different materials, sound characteristics, and so on. I used screws for assembly, though the resulting sound is only average - perhaps even not particularly good.

printing tips

For the down and up plates (as well as the resonator), I used 60% infill with a gyroid pattern. For the keys, I used 100% infill with a concentric pattern. For the middle section, I used 30% infill with a triangular pattern.

components for assembly

For assembly, you will need two M3x40 screws, four M3x20 screws, and three M3x16 screws.

Tagi