modular kalimba beta
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
kalimba suitable for experiments
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 1
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
introduce
I am presenting a model for a fully 3D-printable, modular kalimba (thumb piano). This project is, first and foremost, an attempt to create a kalimba that is well - suited for experimenting with different materials, sound characteristics, and so on. I used screws for assembly, though the resulting sound is only average - perhaps even not particularly good.
printing tips
For the down and up plates (as well as the resonator), I used 60% infill with a gyroid pattern. For the keys, I used 100% infill with a concentric pattern. For the middle section, I used 30% infill with a triangular pattern.
components for assembly
For assembly, you will need two M3x40 screws, four M3x20 screws, and three M3x16 screws.