RAK3212 Breakout Board Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for breakout board
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The RAK3212 is the breakout board for the WisDuo RAK3112 ESP32-S3 LoRa module. It's integrated pin headers allow easy access to all available GPIO's, SPI, I2C, UARTs, analog inputs. It has an USB connector for easy flashing and debugging and a 5V to 3.3V voltage regulator on board. The voltage regulator can be disconnected and for power measurements, the board can be supplied with 3.3V only.
The breakout board has a few minor flaws.
It is vulnerable without an protective cover, which this design is providing.
It is using MHF-4 antenna connectors which can disconnect easily. This enclosure pushes against the MHF-4 antenna connectors to keep them safe in the connector on the RAK3112 module
In addition the enclosure exposes the BOOT and RESET button of the breakout board for easy access.