REMIX: Ender3 Microsoft LifeCam VX-700 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed MRLNWBR's mount for the VX700 and didn't like the idea of having to disassemble the camera, cut wires,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I printed MRLNWBR's mount for the VX700 and didn't like the idea of having to disassemble the camera, cut wires, solder wires, etc. I used the screw hole he created then extended the mount out a little bit and put in a notch to clear the Z-stop. There's a vertical slot for the cable to go through and a shelf for the camera to sit on. It isalmost deep enough so the front flange sits flush but there's still some play in it. There is a slot so the camera can slide in. This has the advantage of being able to easily remove the camera to use elsewhere or whatever.
Update: I've left the original remix in here but added one that's closer to the original. It has a slot in the back that the USB plug can fit through and the camera pressure-fits into the housing. It pretty much just pops in with no modifications necessary.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
5%
Filament: GEEETECH PLA
Category: 3D Printer Accessories