1 / 5
Quick Release Cymbal nut 8mm — zdjęcie 1
1 / 5

Quick Release Cymbal nut 8mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable Quick Release Cymbal nut for your drums

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Quick Release Nut is designed for 8mm thread Cymbal stands

  • Press and insert the Quick Release Nut up to the desired height in your cymbal stack

  • Press and release to remove

  • Turn to tighten/untighten if desired

  • Remains Locked and will not come loose

Materials :

  • 2x M3x10mm socket cap screw (DIN910)

  • 2x M3 Lock Nut (DIN985)

  • PLA/ASA/PETG Filament for the outer piece

  • PETG/PA Filament for the inner thread piece

  • FLEX-TPU Filament for the spring

Slicing recomendations :

You can use the provided .3mf with slicing settings or dial as below

  • Outer Piece
    Layer Height : 0.2
    Perimeters : 3
    Infill : 30% 
        Top Part : use supports
        Bottom Part : no supports needed (already provided - thin layer you have to break)

  • Inner Thread Piece
    Layer Height : 0.1
    Perimeters : 3
    Infill : 20%

  • Spring (Depends on your shore hardness - settings below for very soft Flex-TPU)
    Layer Height : 0.2
    Perimeters : 3
    Infill Type : Gyroid
    Infill : 20%
    Bottom Solid Layers : 0
    Top Solid Layers : 0

Post printing :

  • Remove the supports from Outer piece top part

  • Punch or cut the single layer provided supports for the Outer piece botom part

Assembly :

  1. Insert the M3 lock nuts (snug fit) at Bottom part

  2. Place the Inner Thread in Bottom part piece with arrow pointing upwards

  3. Insert the printed Flex Spring cushion between the two parts

  4. Place the Top Part over

  5. Insert Screws and tighten

  6. Enjoy

Tagi