FTC BIOBUZZ Ball Gauge - NECTAR & POLLEN Sizing Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One flat gauge with a NECTAR (91.4 mm) disc and a POLLEN (71.1 mm) disc for checking intake, hood and ramp gaps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this for checking clearances on a BIOBUZZ robot without grabbing a real ball every time. One end is NECTAR size (91.4 mm) and the other end is POLLEN size (71.1 mm), so you can slide it into an intake, under a hood or down a ramp and see right away if the gap is too tight.
These are the nominal sizes we designed our robot around. The foam balls vary a little, so measure your own game pieces if you need to be exact.
It is 8 mm thick so it doesn't flex, and there is an 8 mm hole in the middle for a lanyard or a hook in the pit.
Print settings: PLA, 0.2 mm layers, 15% infill, no supports. The text is raised 0.6 mm, so for two colour text add a filament change at 8.0 mm.
Modelled with help from Claude (AI) and sliced in OrcaSlicer. I haven't posted a photo of a printed one yet.
Print profiles included (OrcaSlicer, PLA, 0.2 mm, 0.4 nozzle):
Prusa MK4S: 39 g, 1 h 11 min
Prusa CORE One: 39 g, 1 h 2 min
Prusa MINI: 37 g, 2 h 13 min
Bambu Lab A1: 39 g, 56 min
Bambu Lab P1S: 39 g, 49 min
Creality K1C: 39 g, 59 min