1 / 10
Theater Chair Swivel Table - 83.5mm Cupholder with Dual Bearing — zdjęcie 1
1 / 10

Theater Chair Swivel Table - 83.5mm Cupholder with Dual Bearing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is still a work in progress A modified version of NailDRV swivel table for a theatre chair. The mount fits in the…

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

*This is still a work in progress*

A modified version of NailDRV swivel table for a theatre chair. The mount fits in the cup holder hole.The bearing was inspired by the one by SavageRodent: https://www.thingiverse.com/thing:857359. However this version is for a Costco Chair.

Uses the same 6mm ball bearings (X11), a M6 X 60mm Bolt and M6 Nyloc nut.

This version is for a cupholder with a 83.5mm diameter and have a top and bottom thrust bearing.

The wood board is a few bits of scrap I laminated together and I used a CNC to Vcarve inlay the lettering.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20

Filament: Generic PLA Black


Notes:

This model should be printed at 0.2mm as there are sacrificial bridges of that thickness.

No supports required. Print with the bear bearing races facing up.

2X Seat_SwivelTable-_Bottom_Bearing_Holder Required.

Test Fit STL just to check the fit before printing the larger print.

Category: Household

Tagi