Theater Chair Swivel Table - 83.5mm Cupholder with Dual Bearing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is still a work in progress A modified version of NailDRV swivel table for a theatre chair. The mount fits in the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
*This is still a work in progress*
A modified version of NailDRV swivel table for a theatre chair. The mount fits in the cup holder hole.The bearing was inspired by the one by SavageRodent: https://www.thingiverse.com/thing:857359. However this version is for a Costco Chair.
Uses the same 6mm ball bearings (X11), a M6 X 60mm Bolt and M6 Nyloc nut.
This version is for a cupholder with a 83.5mm diameter and have a top and bottom thrust bearing.
The wood board is a few bits of scrap I laminated together and I used a CNC to Vcarve inlay the lettering.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament: Generic PLA Black
Notes:
This model should be printed at 0.2mm as there are sacrificial bridges of that thickness.
No supports required. Print with the bear bearing races facing up.2X Seat_SwivelTable-_Bottom_Bearing_Holder Required.
Test Fit STL just to check the fit before printing the larger print.
Category: Household