Ender 3 Angled Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angled bracket with captive nuts to angle the stock Ender 3 spool holder (Or upgrade stock bracket , in the case of…
- Ocena
- 4 / 5
- Polubienia
- 51
- Pobrania
- 352
- Wydruki
- 5
- Wyświetlenia
- 2303
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
An angled bracket with captive nuts to angle the stock Ender 3 spool holder (Or upgrade stock bracket , in the case of mine) out of the way of a direct drive.
2X M5 Nuts requires (4mm think)
Its friction fit in the extrusion so fitment is very tight but at least with my printer/setting easy enough to fit and move as required.
Fusion files included (I only printed the center section but sides are included in case you prefer the styling.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: CC DIY PLA Black
Notes:
Pause print at 15.86mm with a post process script and drop the nuts in, there is enough room that they just fall in so little chance that the print will shift ect.
Category: 3D Printer Accessories